Apple Watch Serie 6 44mm spare parts

Apple Watch Series 6 44mm Technical Characteristics

The Apple Watch Series 6 44mm is a versatile smartwatch built with a range of impressive features for optimal performance. Here are the key technical characteristics:

• Display: 1.78 inch (44mm) OLED Retina display with 368 by 448 pixels.
• Processor: Apple S6 SiP with 64-bit dual-core processor.
• Storage: 32GB.
• Operating System: WatchOS 7, upgradable.
• Construction: Ceramic back, sapphire crystal glass, and recycled aluminium or stainless steel frame.

Instructions for Replacing Apple Watch Series 6 44mm Parts

Tools You Will Need

• Tri-point Y000 screwdriver
• Curved blade
• Tweezers
• Opening picks
• Adhesive remover

Steps to Replace The Screen

• First, turn off your device.

• Heat up the edges of the display to soften the adhesive underneath.

• Use a curved blade and opening picks to gently pry open the screen.

• Disconnect the display flex cables using the tri-point Y000 screwdriver and tweezers.

• Clean any remaining adhesive and dry thoroughly. Apply fresh adhesive to the new display.

• Attach the new display and reassemble the device.

Steps for Battery Replacement

• First, turn off your Apple Watch.

• Follow the above steps to remove the display screen.

• Once the screen is removed, use the Y000 screwdriver to remove the battery connector shield.

• Disconnect the battery flex cable with tweezers.

• Apply a little bit of adhesive remover under the battery and let it sit for 2-3 minutes.

• Use tweezers to gently lift the battery and replace it with a new one.

• Reassemble the connectors, shield, screen, and turn on your device.

Please follow these steps carefully and remember to work in a clean and well-lit environment. Also, ensure you are grounded to avoid static electricity damaging the internals of your Apple Watch. For more comprehensive instructions and images, it is recommended to refer to an Apple Watch Series 6 44mm repair guide.