Back camera lens by Oppo A58 Oppo A58x Oppo A1x 4190357 Service Pack

The rear secondary camera glass for Oppo A58 5G, A58x 5G and A1x 5G PHJ110, as well as Oppo A78 5G CPH2483 and CPH2495, corresponds to part number 4190357 in Service Pack quality. This component protects the auxiliary camera opening and is designed to replace the external glass when it shows breakage, cracks, scratches or detachment. It allows the protection and finish of the camera area to be renewed without replacing the camera module if it continues to function correctly. It is a replacement part for targeted repairs performed by professional mobile phone repair technicians.

- Brand: Oppo.

- Compatible models: Oppo A58 5G, Oppo A58x 5G, Oppo A1x 5G and Oppo A78 5G.

- Technical models: PHJ110, CPH2483 and CPH2495.

- Component: External rear secondary camera protective glass.

- Quality: Service Pack.

- Part Number (Part No): 4190357.

- Material: Glass.

- Part type: External optical protector for the auxiliary camera.

- Location: Secondary camera opening on the rear of the device.

- Function: External protection of the secondary camera against direct contact with external elements.

- Application: Replacement of deteriorated, cracked, scratched or broken protective glass.

The Service Pack replacement part 4190357 is identified as the secondary camera glass, making it easier to distinguish it from the main camera glass when selecting components. Its application in the specified models allows technicians to organize repairs across different commercial names sharing the same technical code, as well as compatible Oppo A78 5G variants.

Replacing the damaged glass restores physical protection of the optical opening and improves the appearance of the rear camera assembly. When marks or cracks are located on this surface, replacing it also eliminates potential interference with image capture.

By working on the external cover, repair technicians can preserve the electronic camera module that remains functional and limit the repair to the affected area.

- Turn off the device, disconnect the battery when internal access is required and use ESD protection.

- Carefully remove the damaged glass using appropriate tools to protect the camera and housing.

- Remove glass fragments and adhesive residue from the mounting area before installing the new replacement part.

- Carefully clean the optical surface and check that no particles, residue or fragments remain on the lens.

- Position the new glass according to its orientation and align it correctly with the secondary camera opening.

- Use suitable fixing adhesive when required, preventing contact with the optical surface.

- Apply uniform pressure to the fixing area and follow the setting conditions of the adhesive used.

- Check that the glass is correctly seated and that there are no gaps around its edges.

- Perform functional tests on the rear cameras and verify the absence of unusual spots or reflections before completing the repair.