Battery BLP771 by Realme C25Y 5000mAh Service Pack

The BLP771 5000mAh Service Pack battery for Realme C25Y RMX3265, RMX3268 and RMX3269, Realme 6i RMX2040, Realme C3 RMX2020 and Realme Narzo 10 is a replacement part designed to replace the internal battery when it experiences reduced battery life, charging problems or unexpected shutdowns related to deterioration.

This lithium-polymer battery features a typical capacity of 5000mAh, a minimum rated capacity of 4880mAh and a nominal voltage of 3.87V. Its internal format and connection are designed for compatible models, facilitating professional repairs and restoring the device's power performance.

- Brand:Realme.

- Battery model:BLP771.

- Typical capacity:5000mAh.

- Minimum rated capacity:4880mAh.

- Nominal voltage:3.87V.

- Maximum charging voltage:4.45V.

- Technology:Lithium-polymer (Li-Po).

- Typical energy:19.35Wh.

- Minimum rated energy:18.889Wh.

- Quality:Service Pack.

- Component type:Rechargeable internal battery.

- Compatible models:Realme C25Y RMX3265, RMX3268 and RMX3269; Realme 6i RMX2040; Realme C3 RMX2020; Realme Narzo 10.

The BLP771 Service Pack battery helps restore the energy storage capacity of compatible Realme phones when the installed battery shows wear or a significant reduction in battery life.

Its typical capacity of 5000mAh provides an adequate energy reserve for normal device operation, while its lithium-polymer configuration allows the battery to fit into the space designed for the internal battery.

The BLP771 identification makes replacement part selection easier during technical interventions and provides a specific battery reference.

It is particularly useful for mobile phone repair workshops that need to replace deteriorated batteries, resolve power-related issues and extend the service life of compatible Realme devices without replacing the entire phone.

- Switch off the device and disconnect the installed battery before carrying out the replacement.

- Use appropriate tools and electrostatic discharge (ESD) protection.

- Carefully remove the previous battery, avoiding deformation or puncture during extraction.

- Clean adhesive residue from the battery compartment and position the BLP771 battery with correct alignment.

- Connect the battery flex cable without forcing the contacts or applying excessive pressure to the connector.

- Check power-on, battery detection and charging operation before closing the device.

- Perform a charging cycle and check that the displayed battery percentage progresses correctly.