Battery BLP885 4880MaH by Oneplus premium quality

BLP885 4880 mAh Battery for Oppo A76 Oppo A96 4G premium quality

BLP885 4880 mAh battery for Oppo A76 and Oppo A96 4G, compatible with technical models CPH2375 and CPH2333, in premium quality. This spare part is designed to replace a damaged, swollen battery, with reduced autonomy, unexpected shutdowns or irregular charging problems. It maintains the suitable internal format for these Oppo models, with direct board connection and stable electrical parameters for a safe repair. It is a part intended to recover the daily autonomy of the phone and improve energy behavior when the original battery has lost performance due to charging cycles, chemical wear or prolonged use. Spare part aimed at professional installation, with prior charging, power on and consumption test before the final closing of the device.

Key features

BLP885 battery for Oppo A76 and Oppo A96 4G.

Compatible with technical models CPH2375 and CPH2333.

Nominal capacity of 4880 mAh.

Voltage of 3.87 V.

Lithium polymer technology.

Premium quality for professional repair.

Suitable for autonomy faults, unstable charging, restarts, shutdowns or swollen battery.

Recommended to recover the energy performance of the device.

Advantages and quality

Premium quality offers a reliable solution for repair shops that need a stable, well fitting spare part prepared for a durable repair. Its 4880 mAh capacity allows autonomy similar to that expected in daily use of the Oppo A76 and Oppo A96 4G to be recovered, avoiding fast discharge, sudden shutdowns and irregular behaviors associated with aged batteries. The BLP885 format facilitates direct installation in the compatible models, maintaining a firm connection with the board and suitable response during charging. Before closing the phone, it is recommended to check the initial percentage, perform a partial charge, verify that there is no abnormal heating and review standby consumption. Available for immediate shipping from Spain.

Installation tips

1. Always disconnect the old battery before handling internal connectors.
2. Use ESD protection and suitable tools to avoid board damage.
3. Remove the old adhesive without puncturing or bending the battery.
4. Check the BLP885 connector before fixing the battery to the chassis.
5. Perform a charging and power on test before final closing.
6. Verify temperature, consumption and stability during the first minutes.
7. Replace the internal adhesives if they have lost fixing strength.

Technical table