Battery EB-BT875ABY 8000mAh by Samsung Galaxy Tab S7 Galaxy Tab S8 premium quality

EB-BT875ABY 8000mAh Battery for Samsung Galaxy Tab S7 and Galaxy Tab S8 Premium Quality

EB-BT875ABY internal battery for Samsung Galaxy Tab S7 11-inch, compatible with the SM-T870, SM-T875 and SM-T876B technical models, and for Samsung Galaxy Tab S8 11-inch SM-X700, SM-X706B, SM-X706N and SM-X706U. This premium-quality replacement part is designed to restore the autonomy, charging stability and power supply of the tablet. It has a typical capacity of 8000 mAh, a minimum rated capacity of 7760 mAh, a nominal voltage of 3.86 V and an approximate energy rating of 30.88 Wh.

Premium quality provides stable electrical delivery during charging and discharging cycles, a firm connection and a precise fit inside the device. It is suitable when the installed battery shows accelerated discharge, reduced autonomy, unexpected shutdowns, abnormal heating or difficulties completing the charge. The same reference is used in the Galaxy Tab S7 and Galaxy Tab S8 11-inch generations, allowing a professional repair and reducing possible repeat failures related to a degraded battery.

The battery can be identified by the EB-BT875ABY reference. In service catalogues, it is also associated with Samsung part numbers GH43-05028A for Galaxy Tab S7 and GH82-27902A for Galaxy Tab S8. Before final installation, the complete technical model, printed reference, dimensions, flex cable shape, connector and contact position must be checked. Available for immediate shipping from Spain.

Installation Advice

Completely turn off the tablet and use ESD protection.

Disconnect the battery before handling other internal components.

Check that the removed battery uses the EB-BT875ABY reference.

Verify the complete technical model of the tablet before installation.

Compare the dimensions, flex cable shape, connector and contact position.

Perform a power-on and charging test before closing the device.

Monitor consumption and temperature during the first complete charge.

Do not bend, pierce or apply pressure to the cells.

Remove previous residue and use new adhesives to secure the battery.

Perform several normal charging cycles to stabilise the capacity reading.

Technical Table