Battery HB526488EEW 4900mah by Huawei P Smart 2021 Huawei Y7A premium quality

HB526488EEW 5000mAh Battery for Huawei P Smart 2021 Y7a Enjoy 20 SE Honor 10X Lite premium quality

HB526488EEW internal battery for Huawei P Smart 2021, Huawei Y7a, Huawei Enjoy 20 SE and Honor 10X Lite, compatible with technical models PPA-LX1, PPA-LX2, PPA-LX3, PPA-L22, PPA-L22B and PPA-AL20, in premium quality. This spare part is designed to recover the autonomy, charging stability and electrical operation of the device when the battery shows wear, fast discharge, unexpected shutdowns, swelling or power-on faults. With 5000mAh capacity and 3.85V voltage, it allows replacing the deteriorated battery while maintaining correct fitting inside the internal housing of the terminal. Designed for professional installation and charging tests before the final closing of the chassis.

Key features

• Internal battery for Huawei P Smart 2021, Huawei Y7a, Huawei Enjoy 20 SE and Honor 10X Lite
• Compatible with technical models PPA-LX1, PPA-LX2, PPA-LX3, PPA-L22, PPA-L22B and PPA-AL20
• Battery reference HB526488EEW
• Capacity of 5000mAh
• Working voltage 3.85V
• Nominal energy of 18.87Wh
• Li-Polymer technology
• Spare part indicated for loss of autonomy, shutdowns or irregular charging

Premium quality offers a reliable solution to return stable energy behaviour to the Huawei P Smart 2021, Y7a, Enjoy 20 SE and Honor 10X Lite without replacing the complete device. Its internal design is prepared to respect the battery position, connector and available space inside the chassis, making a clean and safe repair easier in technical service. It is a suitable part when the terminal discharges quickly, shuts down with remaining percentage, takes too long to charge, shows unstable cycles or presents reduced performance due to cell wear. For a correct result, it is recommended to perform power-on, charging, consumption and calibration tests before closing. Available for immediate shipping from Spain.

Installation tips

Disconnect the battery before handling any internal flex.

Use ESD protection throughout the repair.

Remove the old battery without puncturing, bending or applying excessive pressure.

Clean adhesive residue before placing the new battery.

Check power-on, charging and percentage stability before closing.

Perform a first calibration with a full charge and discharge cycle.

Do not force the connector or press directly on the cell.

Technical table