Charging port flex by Vivo V29 premium quality

Charging Port Flex for Vivo V29 V2250 Premium Quality

Charging port flex for Vivo V29 5G V2250 in premium quality, designed for device versions that use the USB C connector integrated directly into the central flex. This replacement part allows the physical charging and data transfer connection to be restored when the original flex has damage, wear or connection faults. It corresponds to the internal architecture identified with flex reference ET3038FEKMA-0. It is important to visually verify the component installed before ordering, as there are versions of the Vivo V29 V2250 with a different internal configuration.

Specifications

Central flex with integrated USB C connector.

Compatible with Vivo V29 5G V2250 versions that use this internal architecture.

Reference observed on the flex ET3038FEKMA-0.

It does not correspond to Vivo V29 V2250 versions that use a separate lower charging board with the USB C port integrated into the PCB.

Premium quality provides good assembly precision, stable contacts and proper fit on the main board connectors. It is intended for professional repairs where the flexible charging assembly needs to be replaced while maintaining the internal layout of the device. Its design allows the USB C connection to be restored without replacing other modules when the fault is located in this component. We recommend always comparing the shape, connector position and USB C port location with the part removed from the device.

Installation Tips

Disconnect the battery before handling the flex.

Use ESD protection during the repair.

Check that the connector layout matches exactly with the part removed.

Insert the connectors without applying lateral pressure to the flex.

Perform a charging and data transfer test before closing the device.

Check that the USB C connector is correctly aligned with the chassis.

Notice

The Vivo V29 5G V2250 can be found with different internal charging system configurations. This part corresponds only to versions that have the USB C port integrated directly into the central flex, such as the variant observed with reference ET3038FEKMA-0. It is not compatible with versions that mount the USB C port on a separate lower charging board. It is recommended to visually check the installed replacement part before carrying out the replacement.

Technical Table