Macbook 13" 2019 A2159 repuestos

Technical Characteristics of Macbook Pro 13" 2019 A2159

The MacBook Pro 13" 2019 A2159 comes with an LED-backlit display with IPS technology, and a built-in 58.2-watt-hour lithium-polymer battery.

Technical Specifications

• Processor: 1.4GHz quad-core 8th-generation Intel Core i5 processor Turbo Boost up to 3.9GHz
• Memory: 8GB 2133MHz LPDDR3 memory
• Storage: 128GB SSD storage
• Graphics: Intel Iris Plus Graphics 645
• Operating System: macOS
• Ports: Two Thunderbolt 3 (USB-C) ports

Replacing Macbook Pro 13" 2019 A2159 Repuestos

Preparation

Before starting the replacement process, it is important for you to back up all your data and ensure that your MacBook Pro is disconnected from its power source to prevent electrical shock.

Replacement Steps

1. Off Your Device: First, shut down your Macbook Pro and disconnect the power adapter.
2. Remove the Bottom Case: Use a P5 pentalobe screwdriver to remove the ten screws attached to the bottom case.
3. Unplug the Battery Connector: Locate the battery connector and disconnect it from the logic board to prevent any damage while replacing the damaged parts.
4. Replace the broken part: You then replace the damaged component(s), such as the hard drive/ SSD, RAM, fans, trackpad, etc. Remember that some of these replacements will require additional screwdrivers like T5 or T8.
5. Reassemble Your Device: After replacing the broken parts, reconnect the battery, place the bottom cover back on, and fasten the screws. Then, connect your MacBook Pro to its power source and turn it on. Check to confirm if the replaced part is working as expected.

Final Words

Note: Any damages incurred during self-repairs are not covered by the warranty, so if you're not comfortable performing these steps, please consider getting a professional repair service.