Macbook Air 15.3" M2 A2941 spare parts

Technical Characteristics of MacBook Air 15.3” M2 A2941

The MacBook Air 15.3” M2 A2941 is a high-performance laptop model from Apple, offering speed, reliability, and superior computing. Here are its technical characteristics:

• Processor: Apple M2 chip
• RAM: Up to 16GB
• Storage: Up to 1TB
• Display: Macbook Air Retina Display with 400 Nits brightness
• Resolution: 2560 x 1600 pixels
• Operating System: macOS
• Weight: 2.75 pounds (1.24 kg)
• Ports: Two Thunderbolt3 (USB-C) ports

Instructions for MacBook Air 15.3" M2 A2941 Repuestos Replacement

Please remember that opening your MacBook Air will void your warranty and could potentially damage your device. Proceed with caution.

Before You Begin

• Power off your MacBook Air and disconnect it from the power source.
• Gather necessary tools such as Pentalobe screwdrivers, and a spudger.
• Position your MacBook Air on a clean, flat, and soft surface.

Removing Initial Components

Begin by unscrewing the bottom case. Once all are removed, gently lift and remove the bottom case.

Disconnecting the Battery

To avoid any accidental short-circuits or other damage during the replacement, you must disconnect the battery. Use your spudger to gently disconnect the battery connector from the logic board.

Repuestos Replacement

• Locate the repuesto that you wish to replace.
• Remove any screws connecting the part to the laptop's frame.
• Gently unplug any connected cables or connectors.
• Once the old part has been fully disconnected and unscrewed, remove it from the MacBook.
• Position the new repuesto into the now-vacant spot.
• Screw the new part into place carefully. Ensure it is secure but avoid over-tightening, which can cause damage.
• Reconnect any previously disconnected cables or connectors.
• Ensure everything is properly connected and in place, then reconnect the battery and replace the bottom case.
• Turn on your device to check if the new repuestos works properly.