Macbook Air 2020 A2337 13.3 spare parts

Macbook Air 2020 A2337 13.3 Repuestos Technical Characteristics

The Macbook Air 2020 A2337 13.3 Repuestos presents a robust and portable design. It is an integral part of the Macbook Air 2020 A2337 13.3 inch series with notable technical features that enhance its performance and durability.

Specifications

• Screen Size: 13.3 Inches, Retina IPS Display
• Resolution: 2560 x 1600 pixels
• Processor: Apple M1 chip
• Memory: 8GB or 16GB unified memory
• Storage: Select from 256GB, 512GB, 1TB, or 2TB SSD storage options
• Battery: 49.9 watt-hour lithium-polymer battery
• Ports: Two Thunderbolt/USB 4 ports, 3.5mm headphone jack

Replacement of Macbook Air 2020 A2337 13.3 Repuestos

Important: Replacement of components should be done by individuals with experience in handling delicate electronic components. Always remember to back up your data before performing any hardware changes to your laptop.

Tools Needed

• Pentalobe P5 screwdriver
• T5 Torx screwdriver
• Plastic opening tools
• Spudger
• Tweezers

Step by Step Guide

Below is a general guideline to replace parts on Macbook Air 2020 A2337 13.3 repuestos. Instructions can significantly vary depending on which part you want to replace. Always refer to specific guides for each part.

1. Make sure your Macbook Air is switched off and unplugged from any power source.

2. Use the Pentalobe P5 screwdriver to remove the ten screws at the base of the laptop.

3. Lift off the lower case using a plastic opening tool and set it aside.

4. Depending on the component you wish to replace, you might need to disconnect the battery connector.

5. Use the necessary tools to remove and replace the faulty part.

6. Connect the battery if it was disconnected.

7. Put the lower case back in position and replace the screws.

8. Power on your device to check if the replacement component works correctly.

Note: If your Macbook does not power on or is not working correctly after the replacement, seek professional help.