Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products (tax incl.)
Total shipping (tax incl.) To be determined
Tax: €0.00
Total (tax incl.)
Continue shopping Proceed to checkout

    Macbook Pro 13" 2020 A2251 spare parts

    There are 17 products.

    Macbook Pro 13" 2020 A2251 Technical Specifications

    The Macbook Pro 13" 2020 model A2251 comes with numerous high-end features. Here are some of the key technical specs:

    • Processor: 1.4GHz quad-core 8th-generation Intel Core i5
    • Memory: 8GB 2133MHz LPDDR3
    • Storage: 256GB SSD storage
    • Graphics: Intel Iris Plus Graphics 645
    • Display: 13-inch Retina d...

    Macbook Pro 13" 2020 A2251 Technical Specifications

    The Macbook Pro 13" 2020 model A2251 comes with numerous high-end features. Here are some of the key technical specs:

    • Processor: 1.4GHz quad-core 8th-generation Intel Core i5
    • Memory: 8GB 2133MHz LPDDR3
    • Storage: 256GB SSD storage
    • Graphics: Intel Iris Plus Graphics 645
    • Display: 13-inch Retina display with True Tone
    • Ports: Two Thunderbolt 3 ports
    • Operating System: macOS

    How to Replace Macbook Pro 13" 2020 A2251 Repuestos

    Tools Needed

    • P5 Pentalobe Screwdriver
    • T3 Torx Screwdriver
    • Spudger

    Step-by-Step Replacement Guide

    Disclaimer: Replacing parts in your MacBook Pro may void your warranty. Proceed with caution and at your own risk. Always remember to keep a track of all the screws and their appropriate locations for reassembly.

    Step 1: Power off your MacBook Pro. Turn it upside down and remove the ten P5 Pentalobe screws securing the lower case. Once unscrewed, carefully lift the bottom case and set it aside.

    Step 2: Disconnect the battery connector by carefully lifting it up and out of its socket on the logic board. Use the flat end of a spudger for this task.

    Step 3: Depending on the part you want to replace, remove the appropriate screws. For example, to remove the SSD, unscrew the single T3 Torx screw holding it in place. Use a spudger to carefully lift and remove the SSD from its socket.

    Step 4: Replace the faulty part with the new repuesto. Reconnect the part following the removal steps in reverse. Make sure the repuesto is properly connected and secured by the screws.

    Step 5: Reconnect the battery and double-check all previously disconnected cables for successful reconnections. Position back the lower case and re-secure it using the ten P5 Pentalobe screws.

    Conclusion: With these steps, you would have successfully replaced the repuestos on your MacBook Pro 13" 2020 A2251. If at any point you feel uncomfortable performing such tasks, it is advisable to take your MacBook to a certified Apple technician.

    Less
    More
    Showing 1 - 17 of 17 items

    This store asks you to accept cookies for performance, social media and advertising purposes. Social media and advertising cookies of third parties are used to offer you social media functionalities and personalized ads. Do you accept these cookies and the processing of personal data involved?