Macbook Pro 15" A1707 spare parts

Technical Characteristics of Macbook Pro 15" A1707 Repuestos

The Macbook Pro 15" A1707 repuestos are high-quality spare parts synonymous with precise design and much needed in the repair of the Macbook Pro 15" A1707 model. Given the distinctiveness of Apple's technologies, these repuestos, or replacement parts, follow the same sophistication and precision.

• Screen: Retina Display with True Tone, 15.4-inch (diagonal) IPS technology
• Processor: 2.7GHz quad-core Intel Core i7
• Memory: 16GB of 2133MHz LPDDR3 onboard memory
• Storage: Up to 2TB SSD

Instructions for Replacing Macbook Pro 15" A1707 Repuestos

Preparation

Before you begin any replacement process, ensure you turn off the system, disconnect all peripherals, and work on a static-free environment. Use proper tools designed explicitly for electronics repair.

Memory (RAM) Replacement

Note: RAM is soldered to the logic board and cannot be replaced. If a memory upgrade is required, a new logic board will need to be purchased, or the current one can be replaced by a specialist.

SSD Replacement

• Remove the bottom case of your MacBook Pro. Use a pentalobe screwdriver for this.
• Unplug the battery connector to avoid any electrical discharge.
• Use a T5 Torx driver to remove the screws securing the SSD to the logic board and then lift it gently to avoid any damage.
• Insert the new SSD in place. Ensure it is compatible with the MacBook Pro model.
• Replace the screws and reconnect the battery.
• Close the bottom case and boot your Mac to Disk Utility to format the new SSD and install macOS.

While replacing each part, always remember to follow the manufacturer's guidelines and take precautions to prevent electrostatic discharge.