Macbook Pro A1990 15" 2018 repuestos

Technical Characteristics of Macbook Pro A1990 15" 2018 Repuestos

The Macbook Pro A1990 15" is configured with considerable features, making it a preferred choice among tech-enthusiasts. Here are some of its technical characteristics:

• Processor: 2.9GHz 6-core Intel Core i9
• Memory: 32GB 2400MHz DDR4
• Storage: 4TB SSD
• Display: Retina display with True Tone
• Ports: Four Thunderbolt 3 (USB-C) ports;
• Graphics: Radeon Pro 560X with 4GB of GDDR5 memory and automatic graphics switching, Intel UHD Graphics 630.

Instructions on How to Replace Macbook Pro A1990 15" 2018 Repuestos

Follow the steps below for the replacement of your Macbook Pro A1990 15" 2018 Repuestos. Please remember that attempting to repair your MacBook Pro yourself is at your own risk.

Required Tools

• P5 Pentalobe Screwdriver
• T5 Torx Screwdriver
• Plastic Spudger

Step 1: Remove the Lower Case

First, turn off your Macbook Pro and flip it over. Using your P5 screwdriver, remove the ten screws holding the lower case. Put the screws in a safe place and gently lift up the lower case.

Step 2: Disconnect the Battery

Use your plastic spudger to gently disconnect the battery connector from the logic board. This will ensure no accidental power-on during repair.

Step 3: Access the Repuestos

Depending on the specific repuestos you are replacing, utilization of the required tools varies. Using your T5 Torx Screwdriver, remove necessary screws securing the component that needs to be replaced.

Step 4: Replace the Repuestos

Once the defective hardware is removed, place the new repuesto in the vacated spot. Secure it with the screws taken out earlier for that part.

Step 5: Reassemble the Macbook Pro

Start by re-connecting the battery and then carefully place the lower case back onto the MacBook. Secure it with the ten screws you removed at the beginning. Turn on your MacBook Pro to make sure the new repuesto is functioning properly.

Please remember that this operation, if not performed properly might void your warranty. It is always recommended to seek professional help if you are unsure about any step in this procedure.