Display by Garmin Forerunner 255 for model premium quality

Screen for Garmin Forerunner 255 A04308 AA4308 AB4308 AC4308 Premium quality

Screen for Garmin Forerunner 255, technical models A04308, AA4308, AB4308 and AC4308, in Premium quality, designed to replace a broken display, a screen with no image or display defects. This replacement part restores the correct reading of data and menus on the watch during everyday and sports use. The Forerunner 255 uses a 1.3 inch circular screen, 33 mm in diameter, with a resolution of 260 x 260 pixels and transflective Memory In Pixel MIP technology. We recommend carrying out all checks before final closure.

Specifications

1.3 inch circular screen with a diameter of 33 mm.

260 x 260 pixel resolution.

Transflective Memory In Pixel MIP technology.

Color display with good outdoor visibility.

Compatible with Garmin Forerunner 255 46 mm.

Technical models associated with the series A04308, AA4308, AB4308 and AC4308.

Premium quality intended for professional repair.

We do not specify a particular color for this replacement part because, once installed, only a small line of the external finish remains visible. In addition, our supplier may provide different shades depending on the batch received. This variation is exclusively aesthetic and does not affect the compatibility, installation or operation of the screen.

Premium quality offers a reliable solution for replacing the Garmin Forerunner 255 screen, restoring stable display performance, good definition and correct readability of information. The assembly is prepared to achieve precise fit during installation and facilitate workshop repairs. It is suitable for devices with a broken screen, partial or complete image loss, stains or display defects. The possible difference in shade of the small visible external line does not alter the performance of the replacement part or its correct fit in the watch. Available for immediate shipping from Spain.

Installation advice

Disconnect the battery before handling the assembly.

Use ESD protection during the repair.

Carry out a complete screen test before final closure.

Carefully align the flex cable and connector without applying excessive pressure.

Completely remove any residue from the previous adhesive.

Use suitable adhesive to achieve an even closure.

Check correct display operation and general functionality before sealing the watch.

Opening and replacing the screen may alter the factory sealing, so proper closure must be carried out to reduce the risk of moisture ingress.

Technical table