Display by Samsung Galaxy A14 4G A145 GH81-23541A with black touch screen with black frame Service Pack

Screen for Samsung Galaxy A14 4G SM-A145R GH81-23541A plus black touch panel plus black frame Service Pack

Complete original Service Pack screen for Samsung Galaxy A14 4G, technical model SM-A145R, with part number GH81-23541A. This assembly integrates a PLS TFT LCD screen, black touch digitizer and pre-installed black frame to restore the display and touch response of the device. It is intended for devices with cracks, lines, stains, no image or sensitivity faults. Its frame-mounted construction facilitates the transfer of internal components, improves alignment and reduces the bonding work required during repair. The confirmed compatibility of this reference corresponds to the SM-A145R.

Specifications

The assembly incorporates an original Service Pack 6.6-inch PLS TFT LCD screen, FHD Plus resolution of 1080 by 2408 pixels and a 60 Hz refresh rate.

It includes a black touch digitizer and pre-installed black frame.

The GH81-23541A reference corresponds to the complete screen assembly with frame for Samsung Galaxy A14 4G SM-A145R.

It must not be confused with the SM-A145M versions or the Samsung Galaxy A14 5G from the SM-A146 family.

Service Pack quality provides precise fit, full compatibility with the indicated model and operation according to factory specifications. The panel restores the sharpness, uniform brightness, colour stability and touch response expected from the Samsung Galaxy A14 4G SM-A145R. The pre-installed black frame simplifies installation, ensures correct module alignment and reduces the risk of damaging the screen during assembly. This replacement part allows the motherboard, battery, cameras, speakers, buttons and other components to be transferred to the new chassis with suitable tolerances. It is intended for repair shops looking for a reliable, clean repair using an original Service Pack part identified by the GH81-23541A reference. Available for immediate shipping from Spain.

Installation advice

Disconnect the battery and use ESD protection before handling the components.

Check that the technical model of the device is SM-A145R.

Compare the reference, flex cable, connectors and internal housings with the removed part.

Perform a cold test of the image and touch response before transferring all components.

Align the connectors without bending or forcing the flex cables.

Replace damaged adhesives and remove residue from the previous assembly.

Check the cameras, buttons, speaker, proximity sensor and side fingerprint reader.

Verify the frame fit and complete operation before final closure.

Notice

Original Service Pack screen supplied with the latest available factory firmware. It is recommended to keep the device updated to prevent possible image or touch response faults after installation.

Technical table