DJI Mavic 2 Pro spare parts

DJI Mavic 2 Pro Replacement Parts Technical Specifications

The DJI Mavic 2 Pro is a reliable drone equipped with a variety of high-quality parts. Over time, certain parts may need replacement due to regular wear and tear. Below we’ll discuss the characteristics of the main replacement parts and provide detailed instructions for their replacement.

Replacement Kit Components

• Propellers: These are vital for flight, working to generate lift. They are made of durable, lightweight plastic.
• Battery: Powers the drone, providing a flight time approximately 31 minutes on a full charge.
• Camera: The Hasselblad L1D-20c camera enables aerial photography with stunning color detail.
• Gimbal: This part protects the camera and helps capture steady photos and videos while in flight.
• Motor: There are four motors in total, each one playing a key role in generating the necessary power for takeoff, hovering, and landing.

Replacement Instructions

Replacement of DJI Mavic 2 Pro parts involves careful handling as the components are sensitive. Follow the steps below to safely replace the parts:

Propeller Replacement

• Hold the motor base and twist the propellers counterclockwise for propellers with white rings, and clockwise for ones without white rings. They should release with ease.
• Attach the new propellers by placing them into the slots, and twist in the opposite direction until secure.

Battery Replacement

• Turn off the drone, and firmly grip the battery while pressing the release buttons on both sides.
• Slide the battery out, replace it with the new one by aligning it with the battery slot and slide it in until it clicks into place.

Camera and Gimbal Replacement

• Begin with the drone turned off. Carefully remove the gimbal cover and detach the gimbal clamp.
• Loosen the screws on the camera using a specialized screwdriver, and gently remove the camera.
• Attach the new camera by tightening the screws, reattach the gimbal clamp, and replace the gimbal cover.

Motor Replacement

• Begin by removing the propellers.
• Unscrew the bolts on the faulty motor and carefully remove it, detaching any connected wires.
• Install the new motor and re-connect the wires. Secure it by tightening the screws and re-attach the propellers.

For each part replacement, ensure your Mavic 2 Pro is turned off before starting your work. Always perform replacements on a clean, flat surface and in a well-lit environment for optimal safety.