DJI Phantom 3 Advanced spare parts

DJI Phantom 3 Advanced Repuestos Technical Characteristics

The replacement parts for the DJI Phantom 3 Advanced drone are compatible with this model only, featuring advanced specifications designed for optimal drone performance.

• Propeller Blades: Created with durable plastic, these blades ensure a stable and smooth flight.
• Camera: A 2.7K HD video recording drone camera designed specifically for aerial imaging, including a fixed f/2.8 prime lens and a 20mm focal length.
• Battery: The Intelligent Flight Battery is a 4480mah, 15.2V LiPo4s battery that is specifically designed for the DJI Phantom 3 Advanced.
• Remote Control: A standard DJI Phantom 3 remote controller that communicates via a 2.4GHz Wi-Fi range extender for drone control functionality.
• Main Controller: The main controller is the brain of the entire system, receiving thousands of bits of data every second and translating that data into action as you fly.

Instructions for Replacing DJI Phantom 3 Advanced Repuestos

Note: Always ensure that the drone is turned off and the battery is removed before starting any repairs

Replacing Propeller Blades

Unscrew the damaged blades by rotating it based on their lock direction, and replace with the new blades. Tighten until secure.

Replacing the Camera

First unscrew the camera mount to detach the camera from the drone body. Then, carefully disconnect the cable connecting the camera and the drone. Attach the new camera and replace the cable before securing with the mount.

Replacing the Battery

The battery can be replaced by sliding it out from the drone body. Slide the new battery into the same slot until it clicks to indicate a secure fit.

Replacing the Remote Control

The remote control isn't a part physically attached to the drone but make sure to properly pair your new remote according to the manufacturer's guide.

Replacing the Main Controller

Remove the upper shell of the drone body. The main controller is the large rectangular board. Disconnect all the cables carefully and remove all screws before placing the new controller. Reattach all the cables carefully and secure the screws.

Keep in mind that handling electronic components can be tricky. If you are not comfortable doing it yourself, consider reaching a professional.