DJI Phantom 3 Standard spare parts

DJI Phantom 3 Standard Repuestos Technical Characteristics

The DJI Phantom 3 Standard drone's replacement parts, commonly referred to as 'repuestos', are designed to ensure the longevity and performance of your drone. Here, we detail the primary components that can be replaced or upgraded.

• Propellers: Lightweight, durable, and well balanced, these self-tightening propellers boost the drone's overall flight efficiency.
• Camera: The Phantom 3 Standard camera shoots 2.7K video and photos at up to 12 megapixels with an ISO range of 100-3200 (video) 100-1600 (photo).
• Intelligent Flight Battery: A 4480mAh, 15.2V LiPo battery, which provides impressive flight times of up to 25 minutes.
• Gimbal: A 3-axis gimbal that provides effective camera stabilization independent of the drone’s movements.
• Motherboard: The core component that connects every part of the drone and ensures everything works in synchronization.
• Motor: Brushless motors that provide tremendous lift and maneuverability.

Replacing DJI Phantom 3 Standard Repuestos: Step by Step Guide

Propeller Replacement

Ensure the drone is powered off and on a flat surface. Firmly hold the motor, then twist the propeller counter-clockwise to remove it. Install the new propeller and rotate it clockwise to secure it on the motor.

Camera Replacement

Remove the four gimbal clamp screws using a hex key. Carefully disconnect the cables connecting the camera to the main body. Connect the new camera, attach it to the gimbal and replace the screws.

Battery Replacement

Turn the drone over and press the two battery release buttons. Pull the battery out and slide the new battery into the slot until it clicks into place.

Gimbal Replacement

Unscrew and remove the camera as per the camera replacement instructions. Then, unscrew the connections holding the gimbal to the drone’s body. Connect the new gimbal and secure it using the screws. Re-attach the camera.

Motherboard and Motor Replacement

Replacements for the motherboard and motors are complex and require precision. It is highly recommended to use a qualified DJI repair service for these replacements to avoid potential damage.