DJI Phantom 4 spare parts

DJI Phantom 4 Repuestos Technical Characteristics

The DJI Phantom 4 features intelligent technology and an advanced camera system. Some of its primary technical characteristics are:

• Camera Resolution: 12 MP
• Video Resolution: 4K at 30fps
• Flight Time: Up to 28 minutes
• Max Transmission Range: 5km
• Sensor Range: 15m
• Obstacle Sensing: Five Directions

Replacing DJI Phantom 4 Repuestos

This guide will provide step-by-step instructions on how to replace the DJI Phantom 4 parts. Always remember that the device should be disconnected from any power sources before beginning the replacement process.

Tools Needed

• Phillips Screwdriver
• Spudger
• Replacement Parts

Replacing the DJI Phantom 4 Camera

Follow these instructions to replace the DJI Phantom 4 camera:

• Unscrew and remove the cover on the gimbal connector.
• Disconnect the cables carefully.
• Remove the 4 screws securing the camera to the drone using a Phillips screwdriver.
• After all screws have been removed, the camera unit should drop off easily.
• Install the new camera by reversing the above steps.

Replacing DJI Phantom 4 Propellers

Follow these instructions to replace the DJI Phantom 4 propellers:

• Hold the motor with one hand and rotate the propeller counter-clockwise to unscrew it.
• Remove the propeller from the drone.
• Replace it with the new propeller, screwing it in a clockwise direction until it is secure.

Final Note

While this guide will help you replace some of the DJI Phantom 4 parts, it is recommended that you seek professional assistance if you're not confident about the process or the problem is more complex than what's covered in this guide.