Front camera flex by Google Pixel 6 Pro premium quality

Front Camera Flex for Google Pixel 6 Pro – Premium Quality

This part corresponds to the front-facing (selfie) camera for the Google Pixel 6 Pro, including the flex cable that links the sensor to the device’s motherboard. Built to premium standards, it is ideal for replacing faulty selfie modules with issues such as blur, no image, focus failure, or non-detection.

Technical Specifications

• Sensor Resolution: 11.1 megapixels

• Aperture: f/2.2

• Field of View: 94°

• Focus Type: Fixed focus

• Connector Type: Precision FPC flex

• Placement: Top center in front frame

• Compatibility: Confirmed for Google Pixel 6 Pro

• Supported model numbers: GLU0G, G8V0U, GB7N6

Important Note on Hardware Pairing

From Pixel 6 onward, Google uses component-level pairing via the Titan M2 chip, especially for cameras. This may cause the following issues:

• Even with correct installation, the sensor might not be recognized if it’s not paired.

• The front camera may remain inactive without any software error message.

• Only original components extracted from the same device guarantee full functionality.

This premium-grade replacement is tested and working, but does not bypass Titan M2 security restrictions. Use only when the failure is physical and the camera was originally paired.

Installation Tips

• Always disconnect the battery before installation.

• Use proper tools to avoid damaging connectors or housing.

• Do not bend or stretch the flex during installation.

• Perform a cold test before sealing the phone.

Technical Table