Front camera flex by iPhone 13 Pro max premium quality

Front camera flex for iPhone 13 Pro Max premium quality

The front camera flex for iPhone 13 Pro Max in premium quality is intended for technical repairs where internal elements of the original module—such as the microphone, proximity sensor or optical components—must be recovered or replaced. In this model, the front assembly (camera + sensors + Face ID) is factory-paired with the motherboard, meaning this flex cannot be installed as a full plug-and-play module, as the system will not recognise it and the camera will display a black image.

It is intended exclusively for component recovery, donor use or partial repair, always keeping the device’s original flex, which maintains pairing with the logic board. Premium construction ensures electrical stability, physical compatibility and safe handling during micro-repair procedures on the iPhone 13 Pro Max.

Installation Tips

1. Disconnect the battery before servicing.

2. Always keep the device’s original paired flex.

3. Use ESD protection and precision tools.

4. Transfer only the necessary components (optics, sensor, microphone).

5. Do not install this flex as a complete module: it will not be recognised.

6. Test the original module after assembly.

Warning

On iPhone 13 Pro Max, the front module is paired to the motherboard. This flex is only for component recovery, not a fully functional replacement.

Technical Table