Front camera flex by IPhone 13 Pro premium quality

Front camera flex for iPhone 13 Pro premium quality

The front camera flex for iPhone 13 Pro in premium quality is intended for technical repairs where internal elements of the original front module—such as the microphone, proximity sensor or optical components—must be replaced or recovered. In this model, the front assembly (camera + sensors + Face ID) is factory-paired to the motherboard, meaning this flex cannot be installed as a full plug-and-play module, as the system will not recognise it and the camera will show a black image or malfunction.

This spare is used exclusively for component recovery, internal part transfer or partial repair, always keeping the device’s original flex, which maintains pairing with the motherboard. Premium construction ensures electrical stability, structural compatibility and safe assembly during micro-repair procedures on the iPhone 13 Pro.

Installation Tips

1. Disconnect the battery before servicing.

2. Always keep the device’s original flex.

3. Use precision tools and ESD protection.

4. Transfer only the necessary components (sensor, optics, microphone).

5. Do not install this flex as a complete module: it will not be recognised.

6. Test the original module before closing the device.

Warning

On iPhone 13 Pro, the front module is paired to the motherboard. This flex is only for component recovery, not a fully functional replacement.

Technical Table