Acer Liquid E600 spare parts

Acer Liquid E600 Repuestos Technical Characteristics

The Acer Liquid E600 is a mid-range smartphone that features several specific characteristics. Understanding these characteristics is important in order to replace the repuestos effectively.

• Display: 5.0 inches, 540 x 960 pixels, TFT
• Processor: Qualcomm MSM8212 Snapdragon 200
• Storage: 4 GB, expandable via microSD, up to 32 GB
• RAM: 1 GB
• Battery: Removable Li-Ion 2500 mAh battery
• SIM: Micro-SIM

Instructions for Replacing Acer Liquid E600 Repuestos

Tools Required

In order to start the replacement process, you will need the following tools:

• Small Phillips screwdriver
• SIM card removal tool or pin
• Plastic Opening Tools

Procedure

Follow the steps below to replace the desired components:

Please Note: Make sure the phone is powered off and disconnected from any power source before starting the repair.

Step 1: Removing the Back Cover

• Use your SIM card removal tool to remove the SIM card and any SD card if present.
• Use the plastic opening tools to carefully pry the back cover away from the phone. Start from one corner and work your way around.

Step 2: Removing the Battery

• Gently lift the battery out from its seating using the tab provided or the plastic opening tools.

Step 3: Removing the Motherboard

• Use your small Phillips screwdriver to remove all screws securing the motherboard cover.
• Lift the motherboard cover away to expose the motherboard.

Step 4: Replacing Components

• At this stage, you can replace the desired components. Whether it be the screen, the camera, the motherboard or another part, note that the procedure can vary slightly based on the specific part.

Step 5: Reassembling the Phone

• Once the necessary parts have been replaced, reverse the steps to reassemble your Acer Liquid E600.

Remember, it is critical to ensure all parts are securely placed and all screws are tightly fastened during reassembly to ensure optimal phone function once the procedure is complete.