AGM X1 spare parts

Technical Characteristics of AGM X1 Repuestos

The AGM X1 repuestos, or replacements parts, encompass a range of components designed to maintain the performance of your AGM X1 smartphone. Key aspects include:

• Screen： A 5.5-inch 1080p Super AMOLED capacitive touchscreen.
• Battery： 5400mAh Li-Po battery, non-removable.
• Camera： Dual 13 MP, f/2.0 rear camera and 5 MP front camera.
• Weight： The device weighs about 216 grams.

How to Replace AGM X1 Repuestos

• Tools Needed: Precision screwdrivers, plastic pry openers, tweezers, and a heat gun/hair dryer.

Steps for Replacement:

For safety reasons, remember to switch off the phone and remove the sim card before starting the replacement process.

1. Remove the Back Cover: Use the heat gun to slowly warm up the edges of the back cover. Then, use a plastic pry opener to gently lift the back cover starting from the bottom.
2. Disconnect the Battery Connector: Locate the battery connector on the motherboard. Using the tweezers, disconnect the battery from the motherboard.
3. Remove the Screws: Locate the screws securing the motherboard. Using the screwdriver, remove the screws.
4. Remove the Main Parts: Start with the battery. Pry it up with the plastic pry opener. Then, move on to the cameras. Disconnect the connector cables and lift them up. If you need to replace the screen, proceed with the same process.
5. Install the New Parts: Place the new parts in the correct areas. Then, connect them to the motherboard using the connector cables.
6. Reassemble the Phone: Screw the motherboard back into place. Reconnect the battery. Apply some adhesive on the edges of the back cover and press it back into place.

By following these steps, you should be able to successfully replace the various components on the AGM X1 smartphone.