Alcatel 1X 2019 5008 spare parts

Alcatel 1X 2019 5008 Repuestos - Technical Specifications

The Alcatel 1X 2019 5008 is a smartphone with quite a few impressive technical characteristics. Below is a summary of its key specifications.

• Display: 5.5" Full View 18:9 display
• Resolution: 720 x 1440 pixels
• Processor: Quad-core 1.5 GHz Cortex-A53
• RAM: 2GB
• Internal Storage: 16GB, expandable via microSD
• Camera: Dual 13 MP + 2 MP rear camera; 5 MP front camera
• Battery: Non-removable Li-Ion 3000 mAh battery
• Operating System: Android 8.1 (Oreo)

Instructions to Replace Alcatel 1X 2019 5008 Repuestos

For a proper replacement of parts ("repuestos"), you will need a few specialized tools. These include a set of screwdrivers to open the case and a plastic pry tool to lift the screen.

Step 1: Power Off your Device

Before proceeding with the repairing process, make sure you completely turn off your Alcatel 1X to prevent any electrical damage.

Step 2: Open the Back Cover

Remove the back cover of the Alcatel 1X 2019 by carefully unscrewing the necessary screws. Be mindful, the screws may have different sizes.

Step 3: Remove the Battery

Locate and gently disconnect the battery from its main connector. Now you can lift the battery component out of the device.

Step 4: Replace Desired Component

If you want to replace your screen, speaker, charging port, or any other component, locate the specific part and carefully disconnect it from its connector. Replace it with the new part, making sure that it fits securely.

Step 5: Reassemble Your Device

After replacing the desired component, put the battery back in its place and reconnect it to its connector. Screw the back cover to complete the process.

Note: The phone must be handled with care during and after the repair process. This guide is quite general as the replacement process can vary slightly depending on the specific part being replaced. Always consult a professional if unsure.