Alcatel 3x 2020 Spare Parts

Technical Characteristics of Alcatel 3x 2020 Repuestos

The Alcatel 3x 2020 Repuestos, also known as parts, are designed to match the specifications of the Alcatel 3x 2020 smartphone. Below are the key elements of these parts:

• Display: 6.52 inches, 720 x 1600 pixels, IPS LCD

• Processor: MediaTek Helio P22

• Battery: 5000 mAh, non-removable

• Memory: 4GB RAM, 64GB internal storage expandable with a memory card

• Camera: Triple camera set up with 16 MP, 5 MP wide angle lens and 2 MP depth sensor

How to Replace Alcatel 3x 2020 Repuestos

Below is a step-by-step guide on how to replace the components of your Alcatel 3x 2020 device:

Tools Needed:

• Small Phillips-head Screwdriver

• Small Flat-head Screwdriver

• Plastic Opening Tools

• Tweezers

Steps:

• Power off your Alcatel 3x 2020.

• Use the plastic opening tool to gently pry the back case from the frame, starting from any corner.

• Once the back case is removed, you will find a number of screws securing the interior. Use the Phillips-head Screwdriver to remove these screws.

• After removing the screws, lift the plastic shield to expose the smartphone's internals.

• Identify the component you need to replace. Carefully unplug any ribbons connected to it using the tweezers. Be careful not to damage the surrounding parts.

• After safely removing the old part, replace it with the new Alcatel 3x 2020 Repuesto. Re-secure any ribbons that were unplugged.

• Re-secure the protective plastic shield using the screws that were removed.

• Reattach the back case, applying consistent pressure around the perimeter until it snaps back into place.

• Power on your Alcatel 3x 2020 to test the functionality of the replaced part.

Note: Extreme caution should be exercised throughout the replacement process to avoid unnecessary damage to the device. If in doubt, seek professional help.