Alcatel A5 Led 5085 spare parts

    There are 6 products.

    Technical Characteristics of Alcatel A5 Led 5085 Repuestos

    The Alcatel A5 Led 5085 Repuestos is a reliable smartphone with remarkable features for its price range. Here are its top technical characteristics:

    • Screen: 5.2-inch, 720p resolution display
    • Processor: Mediatek MT6753
    • RAM: 2GB / 3GB
    • Storage: 16GB / 32GB expandable via MicroSD up...

    Technical Characteristics of Alcatel A5 Led 5085 Repuestos

    The Alcatel A5 Led 5085 Repuestos is a reliable smartphone with remarkable features for its price range. Here are its top technical characteristics:

    • Screen: 5.2-inch, 720p resolution display
    • Processor: Mediatek MT6753
    • RAM: 2GB / 3GB
    • Storage: 16GB / 32GB expandable via MicroSD up to 32GB
    • Camera: 8MP main rear camera and 5MP front camera
    • Battery: 2800mAh Li-Ion
    • Operating System: Android 6.0 Marshmallow

    Instructions to Replace Alcatel A5 LED 5085 Repuestos

    Replacing components of the Alcatel A5 LED 5085 Repuestos requires some technical knowledge and precaution. Always consider seeking professional assistance if you are not comfortable with the following process:

    Required Tools

    • Small Phillips Screwdriver
    • Plastic Opening Tools
    • Tweezers

    Instructions

    Step 1: Power off your device and remove the back cover as well as the battery.

    Step 2: Use the small Phillips screwdriver to remove all visible screws.

    Step 3: Carefully use the plastic opening tool to pry open the phone, starting from one corner and sliding it around to release all clips.

    Step 4: Disconnect the connector cables attached to the motherboard. Use a pair of tweezers if needed.

    Step 5: Once all the connections from the motherboard are released, you can carefully lift it from the phone frame.

    Step 6: Now, you can replace the broken or faulty component with the new one.

    Step 7: Reassemble the phone by reversing the steps. Replace the motherboard, connect all cables back, press the frame until all clips click into place, insert all screws, put the battery and the back cover on again.

    Please take note, this is a general guide and some steps may vary depending on the specific part you are replacing.

    Less
    More
    Showing 1 - 6 of 6 items