Alcatel one pop 4s 5095 spare parts

Technical specifications of Alcatel One Pop 4S 5095 Repuestos

Before proceeding with the replacement instructions, it is essential to understand the key technical features of the Alcatel One Pop 4S 5095 Repuestos. This smartphone comes with a range of features that make it special.

• Display: 5.5" FullHD 1920x1080 pixels, IPS LCD
• Processor: Mediatek Helio P10
• Memory: 2GB RAM, 16GB internal storage expandable via microSD card
• Camera: 13MP rear, 5MP front
• Battery: 2960mAh
• Operating System: Android 6.0 Marshmallow

Replacement Instructions for Alcatel One Pop 4S 5095 Repuestos

Tools Required:

• Device repair kit
• Heat gun or hairdryer

Procedure:

Note: It is recommended to back up your data before attempting the repair.

• Step 1: First, power off your Alcatel One Pop 4S.
• Step 2: Use a heat gun or a hairdryer on the back cover's edges to loosen the adhesives that hold the back cover in place. Remember not to apply too much heat to prevent damage.
• Step 3: Use a prying tool from your repair kit to gently pry open the back cover. Start from one corner and slowly work your way around.
• Step 4: Once the back cover is removed, you'll see the battery and the motherboard. The specific part that needs replacing will determine your next steps.
• Step 5: For battery replacement, unscrew the screws that hold the battery connector in place, lift the connector, and gently remove the battery. Replace it with the new one and reassemble.
• Step 6: For screen replacement, disconnect the display connector from the motherboard and carefully remove the screen. Install the new screen, connect the cable back, and reassemble.

Please make sure to work gently throughout the process to avoid any damage to the device. If you find the procedure difficult at any point, it's recommended to take the device to a professional repair service.