Alcatel One Touch POP 3 (5.5) 5025D spare parts

Technical Specifications of Alcatel One Touch POP 3 (5.5) 5025D Repuestos

The Alcatel One Touch POP 3 (5.5) 5025D is a smartphone that was released in October 2015. It is classified as a dual-SIM smartphone that supports Micro-SIM cards.

• Screen Size: 5.5 inches
• Screen Resolution: 720 x 1280 pixels
• Processor: Quad-Core 1.3 GHz Cortex-A7
• RAM: 1GB
• Internal Storage: 8GB, expandable up to 32GB via microSD card
• Rear Camera: 8MP
• Front Camera: 5MP
• Battery: Removable Li-Ion 2910mAh battery
• Operating System: Android 5.1 (Lollipop)

Instructions on How to Replace Alcatel One Touch POP 3 (5.5) 5025D Repuestos

Replacing parts on your Alcatel One Touch POP 3 requires some patience and a few tools. Here are the steps to replace the most often replaced parts, such as the battery and screen:

Replacing the Battery

1. Turn off the device.
2. Remove the back cover of the phone.
3. Remove the old battery from the device. Take the utmost care not to damage any surrounding components.
4. Place the new battery in the same position and connect it to the device.
5. Attach the back cover again.
6. Turn on the device to check if it's working properly.

Replacing the Screen

1. Disable the device and remove the back cover.
2. Disconnect the battery from the device.
3. Remove the screws securing the screen to the device.
4. Carefully lift the screen from the device. Be cautious not to damage any cables attached to the screen.
5. Disconnect any cables connected to the old screen and replace it with the new one.
6. Replace the screws that were removed earlier to secure the new screen to the device.
7. Connect the battery and place the back cover on the device.
8. Turn on the device and check if the new screen is functioning correctly.

Note: Always remember to disconnect your device from any charging cables and turn it off before starting your repair process. If you are uncomfortable performing a repair yourself, consider seeking professional help.