Alcatel Pixi 4 5010D spare parts

Technical Characteristics of Alcatel Pixi 4 5010D Repuestos

The Alcatel Pixi 4 5010D repuestos, or replacement parts, are integral to maintaining the functionality and performance of the device.

• Display Screen: The device features a 5.0" display with 480x854 pixels resolution.
• Battery: It carries a removable Li-Ion 2000mAh battery.
• Camera: The smartphone has an 8 MP, LED flash rear camera and a 5 MP front camera.
• Chipset: A Quad-core 1.3 GHz Cortex-A7 with a Mediatek MT6580 chipset.
• Memory: Boasts a device memory of 1GB RAM with a storage capacity of 8GB, extendable up to 32GB via microSD.

Instructions for Replacing Alcatel Pixi 4 5010D Repuestos

Replacing parts on your Alcatel Pixi 4 5010D can be complex. It’s advised to use professional assistance, but if you choose to do it yourself, follow these instructions closely.

Screen Replacement

Before proceeding, ensure the new screen is compatible with your Pixi 4 5010D.

• Turn off the device: Always start by turning off your device to avoid any short circuits.
• Remove the battery: Open the back case and remove the battery.
• Remove the Screen: Using a screen suction handle and a prying tool, separate the screen from the front housing.
• Install new screen: Connect the new display to the motherboard, then gently lower it into place within the housing.
• Reassemble: Replace the battery and reattach the back case.

Battery Replacement

Battery replacement in the Alcatel Pixi 4 5010D is quite simple.

• Turn off the device: Always shut down your device first. This is to prevent data loss or damage.
• Remove the battery: Carefully open the back cover and gently take out the battery.
• Replace the Battery: Insert the new battery into the battery slot, making sure to align the battery contacts with the connectors in the battery compartment.
• Replace the Cover: Press the back cover back into place until it clicks.

Always handle your Alcatel Pixi 4 5010D repuestos with care for the best results.