Alcatel Pop 3 5054 spare parts

Technical Characteristics of Alcatel Pop 3 5054 Repuestos

The Alcatel Pop 3 (5.5) LTE, also known as Alcatel 5054, is a smartphone that was launched in 2015 with a number of notable features and components - collectively referred to as 'repuestos'. Here are some of its key technical characteristics

• Screen: 5.5 inches with 720 x 1280 pixels resolution.
• Processor: Quad-core 1.1 GHz Qualcomm Snapdragon 210.
• Operating System: Android 5.1 (Lollipop)
• Memory: 1GB RAM coupled with 8GB internal storage, expandable up to 32GB through a microSD card.
• Camera: 8MP rear and 5MP front.
• Battery: 2910mAh.

Instructions to Replace Alcatel Pop 3 5054 Repuestos

Please follow these steps carefully when replacing parts of your Alcatel Pop 3 (5.5) LTE. The steps provided are general guidelines and might vary based on the part being replaced.

Screen Replacement:

• Turn off: Ensure your Alcatel Pop 3 (5.5) LTE is completely turned off and unplugged from any power sources.
• Remove Back Cover: Start by removing the back cover of the phone using a plastic opening tool.
• Disconnect Battery: Safely disconnect the battery connector from the motherboard.
• Remove Screws: Remove all visible screws to free the Screen from the Frame.
• Remove Screen: Gently lift the display off from the frame.
• Install New Screen: Reverse these steps to install the new screen.

Battery Replacement:

• Turn off: Ensure your Alcatel Pop 3 (5.5) LTE is completely turned off and unplugged from any power sources.
• Remove Back Cover: Use a plastic opening tool to remove the back cover.
• Remove Battery: Lift and remove the battery from its compartment.
• Insert New Battery: Place your new battery into the compartment, making sure all connectors align.
• Replace Back Cover: Snap the back cover back into place.