Alcatel Vodafone Smart Prime 6 895N spare parts

    There are 2 products.

    Technical Characteristics of Alcatel Vodafone Smart Prime 6 895N Repuestos

    The Alcatel Vodafone Smart Prime 6 895N comes packed with various repuestos or replacement parts that are both, high-quality and highly functional. Here are some of the main replacement parts for this device:

    • Screen: The device possesses a 5" screen with a resolution...

    Technical Characteristics of Alcatel Vodafone Smart Prime 6 895N Repuestos

    The Alcatel Vodafone Smart Prime 6 895N comes packed with various repuestos or replacement parts that are both, high-quality and highly functional. Here are some of the main replacement parts for this device:

    • Screen: The device possesses a 5" screen with a resolution of 720x1280 pixels.
    • Battery: The phone's 2460mAh removable battery.
    • Camera: It has 8MP rear camera and 2MP front for selfies.
    • Processor: Equipped with a Quad-core 1.2 GHz Cortex-A53 processor.
    • Memory: 8GB of internal storage can be increased up to 32GB with the use of a microSD.

    Instructions for Replacing Alcatel Vodafone Smart Prime 6 895N Repuestos

    Before starting, remember that these instructions should be followed with great care. The replacement of smartphone parts may void the warranty and if not conducted correctly may cause irreversible damage to the device.

    Step 1: Powering off the device

    Switch off the device to prevent any possible short circuits during the replacing process.

    Step 2: Removing the back cover and battery

    Before you start removing the back cover, have a prying tool to easily remove the cover. Once open, remove the battery with caution.

    Step 3: Removing the Screen

    • The screen is bonded to the frame with strong glue and it will be a bit hard to remove it. Use a heat gun or hairdryer to heat the edges and soften the glue.
    • Once the screen starts to loosen, use a prying tool to gently lift it off. Be very careful not to put too much pressure as the screen may break.

    Step 4: Replacing parts

    Depending on the region that includes the damaged part, for example, a faulty camera or the processor, proceed to replace them with the new parts.

    Step 5: Reassembling the device

    After changing the faulty parts, reassemble your phone by following these steps in backward order. Be sure once again to turn off the device while reassembling it.

    Facing any difficulties, it is best to take the device to a professional for repairs.

    Less
    More
    Showing 1 - 2 of 2 items