Alcatel Vodafone Smart Ultra 6 995N VF995 VF995N spare parts

Technical Characteristics of Alcatel Vodafone Smart Ultra 6 995N VF995 VF995N

The Alcatel Vodafone Smart Ultra 6, model numbers 995N, VF995, and VF995N, is a robust smartphone equipped with a variety of features for versatile use. Below are the main highlights of its technical specifications:

• Operating System: Android 5.0 Lollipop
• Display: 5.5-inch, 1080p full HD
• Processor: Qualcomm Snapdragon 615
• RAM: 2GB
• Storage: 16GB, expandable up to 64GB
• Camera: 13MP rear camera, 5MP front camera
• Battery: 3000mAh

Instructions on How to Replace Alcatel Vodafone Smart Ultra 6 995N VF995 VF995N Repuestos

Replacement and repair of parts, or 'repuestos,' for the Alcatel Vodafone Smart Ultra 6 requires careful attention and the right tools. Refer to the instructions below to guide you through the process:

1. Prepare your tools

The basic tools required for smartphone repair include small screwdrivers, plastic pry tools, tweezers, and a heat gun.

2. Turn off the device

Ensure your device is powered off before initiating any repairs. This helps prevent accidental short circuits.

3. Remove the back cover

Use a plastic pry tool to gently lift the edges of the back cover and remove it from the main body of the phone.

4. Remove the battery

Detach the battery connector from its socket on the motherboard using the tweezers. Carefully lift the battery up and out of the device.

5. Replace the desired component

Depending on the part to be replaced, you may need to remove additional screws or disconnect more cables. Always be gentle to avoid damaging the device.

6. Reassemble the device

Once the new part is securely in place, reassemble the device by reversing the disassembly steps. Turn on your device to confirm that the replacement part functions properly.

Disclaimer:

Device disassembling and part replacement should only be performed by individuals comfortable with electronic repairs. If in doubt, always seek professional assistance.