Alcatel Vodafone Smart V10 VFD730 spare parts

Alcatel Vodafone Smart V10 VFD730 Specifications

The Alcatel Vodafone Smart V10 VFD730 is a powerful smartphone known for its robust performance and sleek design. Below are some of its key specs:

• Display: 5.94 inches, 720 x 1560 pixels, IPS LCD
• Processor: Quad-core 2.0 GHz Cortex-A53
• RAM: 3GB
• Storage: 32GB, expandable up to 128GB via microSD
• Camera: Dual 13MP + 2MP Rear and 8MP Front
• Battery: Non-removable Li-Ion 3400 mAh Battery
• Operating System: Android 9.0 (Pie)

How to Replace Alcatel Vodafone Smart V10 VFD730 Repuestos

Here is a step by step guide on how to replace the Alcatel Vodafone Smart V10 VFD730 repuestos:

Tools Needed

You'll need the following tools:

• Small Phillips Screwdriver
• Spudger Tool
• Opening Tool
• Tweezers

Replacement Procedure

Follow the steps below to start the replacement process:

1. Before you start, power off your device and unplug any connected cables for safety.
2. With the opening tool, carefully pry off the back case of the smartphone.
3. Next, using the Phillips Screwdriver, unscrew the screws holding down the metal plate that protects the internal components.
4. Now, use your spudger tool to detach the battery connector.
5. If you're replacing the screen, disconnect the display cable. For other components, disconnect the relevant cable.
6. Then, carefully remove the battery or the component being replaced after unscrewing any additional holders.
7. Install the new battery or component in the phone and retrace the above steps backwards to reassemble your phone.

Remember to take utmost caution when carrying out this procedure as excess pressure can damage fragile parts.