Alcatel Vodafone Smart V8 spare parts

    There are 6 products.

    Technical Characteristics of Alcatel Vodafone Smart V8 Repuestos

    The Alcatel Vodafone Smart V8 Repuestos are specialized parts designed to maintain the high performance of this smartphone model. They are key in repairs and replacements for the device to ensure its optimal operations.

    • Screen Size: 5.5-inch Full HD LCD
    • Resolution: 1080 x 1920...

    Technical Characteristics of Alcatel Vodafone Smart V8 Repuestos

    The Alcatel Vodafone Smart V8 Repuestos are specialized parts designed to maintain the high performance of this smartphone model. They are key in repairs and replacements for the device to ensure its optimal operations.

    • Screen Size: 5.5-inch Full HD LCD
    • Resolution: 1080 x 1920 pixels
    • Processor: Qualcomm Snapdragon 435
    • RAM: 3 GB
    • Internal Storage: 32 GB
    • Rear Camera: 16MP
    • Front Camera: 8MP
    • Battery Capacity: 3,000mAh
    • Operating System: Android 7.1.1

    How to Replace Alcatel Vodafone Smart V8 Repuestos

    Note: The following steps should be followed precisely to avoid any damage to the device while replacing the parts.

    First, ensure you have the necessary tools for this task including a precision screwdriver set, plastic opening tools, and the replacement parts.

    Step 1: Removing the Back Cover

    • Power off the phone completely.
    • Remove the SIM card tray and SD card if applicable.
    • Gently use the plastic opening tools to pry the back cover away from the rest of the device.
    • Keep the removed parts in a safe place to avoid losing them.

    Step 2: Detaching the Battery

    • Uncover the screws fastening the cover plate above the battery.
    • Use the suitable screwdriver from your toolkit to remove these screws.
    • Gently detach the battery's connector from the motherboard.
    • Remove the battery carefully, avoiding damage to other components.

    Step 3: Replacing the Repuestos

    • Locate the desired part to be replaced.
    • Depending on the part, unscrew and carefully remove it from the phone.
    • Place the new part in the correct position and screw it back into place.

    Step 4: Reassembling the Phone

    • Reattach the battery and its connector to the motherboard.
    • Reinstall the cover plate and tighten the screws.
    • Press the back cover into place until it clicks on all sides.
    • Insert the SIM card tray and SD card if applicable.

    After these steps, the device should be fully functional with the replaced parts. If not, please seek professional assistance.

    Less
    More
    Showing 1 - 6 of 6 items