Asus Rog Phone 2 ZS660KL repuestos

    There are 17 products.

    Asus Rog Phone 2 ZS660KL Repuestos Technical Characteristics

    The Asus Rog Phone 2 ZS660KL is a top-tier gaming smartphone with a range of high-quality components. Here are the technical details of its main spare parts:

    • Screen: 6.59 inches, 1080 x 2340 pixels, AMOLED capacitive touchscreen
    • Battery: Non-removable Li-Po 6000 mAh battery
    • ...

    Asus Rog Phone 2 ZS660KL Repuestos Technical Characteristics

    The Asus Rog Phone 2 ZS660KL is a top-tier gaming smartphone with a range of high-quality components. Here are the technical details of its main spare parts:

    • Screen: 6.59 inches, 1080 x 2340 pixels, AMOLED capacitive touchscreen
    • Battery: Non-removable Li-Po 6000 mAh battery
    • Back Camera: 48 MP, f/1.8, 26mm (wide), 1/2.0", 0.8µm, PDAF, Laser AF 13 MP, f/2.4, 11mm (ultrawide)
    • Front Camera: 24MP, f/2.2
    • Motherboard: Qualcomm SDM855 Snapdragon 855+ (7 nm)
    • Memory:128GB 8GB RAM, 256GB 12GB RAM, 512GB 12GB RAM, 1TB 12GB RAM

    Instructions for Replacing Asus Rog Phone 2 ZS660KL Repuestos

    Here are detailed instructions on how to replace the Asus Rog Phone 2 ZS660KL spare parts:

    Screen:

    Power off the phone before starting the repair process. Use a heat gun to loosen the adhesive along the edges of the display assembly. Take a plastic opening tool and gently pry up the screen around the edge. Then, disconnect and remove the damaged screen. Connect the new screen, set it in place, and make sure to press firmly around the edges to secure it.

    Battery:

    To replace the battery, you must first remove the back cover and unscrew the protective plate. Disconnect the battery connector. Underneath the connector, there's a pull tab. Pull the tab to lift the battery from the mid-frame. Place the new battery, reconnect the connector, replace the protecting plate and, finally, the back cover.

    Motherboard:

    Remove the back cover and disconnect all connectors from the motherboard. Unscrew all the screws keeping the motherboard in place. Be careful, as cables and connectors should be disconnected with a non-metal tool to avoid any damage. Put the new motherboard, securing it with all the screws and connectors, and put back the back cover.

    Remember, all these procedures should be performed carefully and patiently. Using correct and precision tools will make these repairs easier and protect your device from any damages.

    Less
    More
    Showing 1 - 17 of 17 items