Asus Zenfone 2 Laser ZE600KL spare parts

Technical Characteristics of Asus Zenfone 2 Laser ZE600KL Repuestos

The Asus Zenfone 2 Laser ZE600KL is a smart device that offers exceptional features to its users. It is important to consider the specifications of these replacement parts in terms of their compatibility and performance.

Display

The display screen is a 6.0" IPS LCD display with a resolution of 720 x 1280 pixels.

Processor

It operates with a Qualcomm Snapdragon 410 processor that ensures a smooth performance.

Battery

The device is powered by a removable Li-Po 3000mAh battery which ensures longevity.

Camera

It comes with a 13MP back camera and a 5MP front camera for capturing high-quality images.

Memory

The device offers a RAM of 2/3GB along with a storage of 16GB or 32GB which can be expanded up to 128GB via a microSD card.

Replacing Asus Zenfone 2 Laser ZE600KL Repuestos

Please ensure that you follow each step keenly to avoid any chances of damaging the device permanently.

Tools Needed

• Opening tool
• Tweezers
• PH000 screwdriver

Step-by-Step Guide

1. Turn Off The Phone

Before you begin, make sure that the device is switched off to avoid causing any short circuit during the process. Keep the power-off button pressed until the device shuts down completely.

2. Remove the back cover

Use an opening tool to pry open the back cover from the phone. Start at the bottom of the device and work your way to both sides.

3. Remove Battery

After the back cover is removed, you will see the battery, which is easy to remove using the provided slot at the bottom. It is advisable to use a spudger or tweezers to lift the battery out easily.

4. Removing the components

Remove the various components, including the circuit board, carefully. Use your tweezers to disconnect attached cables and your screwdriver to unscrew the necessary screws.

5. Install the new component

Once done, replace the faulty component with the new one, and reassemble the phone by screwing the circuit board back in place, connecting the necessary cables, putting the battery back, and snapping the back cover into place.