Asus Zenfone 3 Zoom ZE553KL

Technical Characteristics of Asus Zenfone 3 Zoom ZE553KL

The Asus Zenfone 3 Zoom ZE553KL is a smartphone that balances affordability with a premium feature set. It includes:

• 5.5-inch display
• Resolution of 1080x1920 pixels
• Powered by a 1.4GHz octa-core Qualcomm Snapdragon 625 processor
• 3GB of RAM
• Internal storage of 32GB that can be expanded up to 2000GB via a microSD card
• 5000mAh non-removable battery
• Equipped with a 12MP primary camera on the rear and a 13MP front shooter for selfies
• Android 6.0 operating system
• Weighs 170.00 grams
• Dual SIM Smartphone that accepts Nano-SIM and Nano-SIM

How to Replace Asus Zenfone 3 Zoom ZE553KL

Before you start, ensure that you have the correct tools for the job. This includes a small Phillips-head screwdriver, a thin plastic spatula or opening tool, and a replacement part that matches the model of your phone.

DISCLAIMER: Proceed with caution. Smartphone repair requires precision and patience. We cannot be held responsible for any damage that may occur during the repair process. Make sure you follow each step correctly to avoid any unintentional damage.

Step 1: Turn Off the Phone

Before doing any repairs, make sure to turn off the phone to avoid causing any short circuit during the procedure.

Step 2: Remove the SIM Tray

This phone has a SIM tray on the side; remove it carefully with the SIM tray ejection tool.

Step 3: Opening the Phone

Use your plastic opening tool to gently pry open the back cover of the phone. Start on one side and slowly work your way around the phone.

Step 4: Disconnect the Battery

Before performing further steps, disconnect the battery connector to avoid causing any damage.

Step 5: Replacement

Whatever part you're replacing, now is the point to do so. Whether it's the screen, a camera, the charging port or something else, carefully remove the faulty component and replace it with the new one.

Step 6: Reassembly

Once the new part is in place, reassemble your phone by reversing the steps. Be sure to reconnect the battery and secure all screws and modules in the correct order.