Asus Zenfone 4 Selfie Pro ZD552KL spare parts

Technical Characteristics of Asus Zenfone 4 Selfie Pro ZD552KL Repuestos

The Asus Zenfone 4 Selfie Pro ZD552KL boasts impressive technical features, that empower its functionality and allow it to deliver top-notch performance. Let’s take a look at the specifics of its key repuestos (replacement parts).

• Screen: It has a 5.5-inch AMOLED capacitive touchscreen, with a resolution of 1080 x 1920 pixels.
• Processor: Its Qualcomm MSM8953 Snapdragon 625 chipset, coupled with an Octa-core 2.0 GHz Cortex-A53 CPU, makes it powerful.
• Battery: The device operates on a non-removable Li-Ion 3000 mAh battery to deliver long-lasting power.
• Camera: It features a dual 24MP+5MP front camera for sharp selfies and a 16MP rear camera.
• Memory: It includes internal storage of 64GB (expandable via MicroSD, up to 256GB) and 4GB of RAM.
• Operating System: This device runs on Android 7 (Nougat), upgradable to Android 9 (Pie).

Instructions to Replace Asus Zenfone 4 Selfie Pro ZD552KL Repuestos

While smartphone repair and part replacement may vary, depending on the specific part, here are some general steps on how to replace repuestos on your Asus Zenfone 4 Selfie Pro ZD552KL.

Screen Replacement

• Step 1: Ensure the device is turned off.
• Step 2: Carefully remove the SIM card and memory card if they're inserted.
• Step 3: Use a professional-grade tool to separate the phone's screen from its frame. Be careful so as not to damage any interior components.
• Step 4: Once separated, disconnect the screen's connector from the main board. This should free the broken screen completely.
• Step 5: Attach the new screen to the main board connector, then carefully insert it back into the phone frame. Ensure it fits securely into the frame.

Battery Replacement

• Step 1: After turning off the phone, remove the back cover using a suitable tool.
• Step 2: Locate the battery and disconnect it from the motherboard.
• Step 3: Gently lift and remove the old battery from its housing.
• Step 4: Place the new battery into the battery housing, making sure it fits properly.
• Step 5: Reconnect the battery to the motherboard, and replace the back cover.

Please remember, these are general instructions. Always follow exact manufacturer guidance and take professional help when needed.