Asus Zenfone 5 ZE620KL spare parts

    There are 31 products.

    Technical Characteristics of Asus Zenfone 5 ZE620KL Repuestos

    The Asus Zenfone 5 ZE620KL Repuestos are precision-made parts that equip this smartphone with its features and operations. Below is a list of some of these components:

    • Display: 6.2 inches, 1080 x 2246 pixels, Super IPS+ LCD
    • CPU: Qualcomm Snapdragon 636, Octa-core 1.8 GHz Kryo 260
    • C...

    Technical Characteristics of Asus Zenfone 5 ZE620KL Repuestos

    The Asus Zenfone 5 ZE620KL Repuestos are precision-made parts that equip this smartphone with its features and operations. Below is a list of some of these components:

    • Display: 6.2 inches, 1080 x 2246 pixels, Super IPS+ LCD
    • CPU: Qualcomm Snapdragon 636, Octa-core 1.8 GHz Kryo 260
    • Camera: Dual: 12 MP + 8 MP, gyro EIS, dual pixel PDAF & laser AF
    • Memory: Internal 64GB, 4/6 GB RAM Expandable up to 400GB
    • Battery: Non-removable Li-Ion 3300 mAh battery

    Instructions for Replacing Asus Zenfone 5 ZE620KL Repuestos

    In replacing these parts, it is necessary to have a few tools at hand: a small Phillips screwdriver, tweezers, a small flat screwdriver, and a plastic tool for opening cases. Always remember to turn off the phone before you start.

    Follow these steps:

    Step 1: Remove the SIM Card Tray and Back Cover

    • Remove the SIM card tray using the provided tool in the box or a paper clip.
    • Heat the edges of the back cover to loosen the adhesive.
    • Using a plastic case opening tool, carefully pry around the edges of the back cover to open it up.

    Step 2: Disconnect the Battery and Remove Screws

    • With the device opened, locate and carefully disconnect the battery connector.
    • After disconnecting the battery, locate and remove all visible screws inside the phone using the screwdriver.

    Step 3: Unplug the Cables and Replace Part(s)

    • Next, unplug all flex cables connected to the motherboard.
    • Remove the motherboard and replace the damaged part (e.g., battery, camera, display).

    Step 4: Reassemble the Phone

    • After replacement, reassemble the phone by carefully following the disassembly steps in reverse order.
    • Ensure that all cables are plugged back into their respective spots and that all screws are placed back carefully.
    • Replace the back cover and press firmly until it clicks back into place.
    • Finally, power on your device to ensure all connections were successful and the replaced parts are working properly.

    Remember, this is a general guide only. If you're not confident in replacing electronic parts by yourself, it's always best to consult with a professional or technician.

    Less
    More
    Showing 1 - 30 of 31 items