ASUS Zenfone GO ZC500TG spare parts

ASUS Zenfone GO ZC500TG Technical Characteristics

The ASUS Zenfone GO ZC500TG is a high-quality smartphone that boasts a robust set of features. Here are some of its key specifications.

• Screen Size: 5.0 inches, 720 x 1280 pixels, 16:9 ratio (~294 ppi density)
• Operating System: Android 5.1 (Lollipop)
• Processor: Quad-core 1.3 GHz Cortex-A7
• Storage: 8GB/16GB internal, expandable up to 64GB via microSD
• RAM: 2GB
• Battery: Removable Li-Po 2070 mAh battery
• Camera: 8 MP Rear, 2 MP Front

How to Replace the ASUS Zenfone GO ZC500TG Repuestos

Please ensure you have the necessary tools before proceeding: a small Phillips screwdriver, a spudger, a small suction cup, and a pair of tweezers.

Step 1: Power off your device.

Before you begin, ensure your device is switched off to safeguard against any potential electrical short circuits.

Step 2: Remove the back cover.

Use your finger to gently pry off the back cover from the small notch at the bottom of the phone.

Step 3: Remove the battery.

Next, utilize the spudger to gently remove the battery, beginning from the top right corner.

Step 4: Remove the screws.

With your Phillips screwdriver, remove the remaining screws securing the mid-frame.

Step 5: Remove the mid-frame.

Use the suction cup to lift the mid-frame away carefully from the device.

Step 6: Disconnect Repuestos.

Utilize the spudger to disconnect the repuestos from their connectors on the motherboard.

Step 7: Replace the repuestos.

Now you can replace the repuestos. Connect the new part to the motherboard, and make sure it's properly secured.

Step 8: Reassemble the phone.

The final step involves reversing the disassembly process. Reattach the mid-frame, screw it back in, put the battery in place, and put the back cover back on.

Note: This guide intends to give you a basic idea of how to replace your phone's parts. If you are not comfortable doing it yourself, seek professional assistance.