Blackberry KEY 2 Lite spare parts

Blackberry KEY2 Lite Technical Characteristics

The Blackberry KEY2 Lite, also known as Blackberry KEY 2 LE, is a powerful combination of style, functionality, and the best of Blackberry software.

• Display: 4.5 inch IPS LCD, 1080 x 1620 pixels, 3:2 ratio (~434 ppi density)
• Processor: Qualcomm SDM636 Snapdragon 636(14 nm), Octa-core 1.8 GHz Kryo 260
• Memory: 32GB/64GB, 4GB RAM, Expandable via microSD (up to 256GB)
• Camera: 13 MP, PDAF, 5 MP depth sensor, Dual-LED dual-tone flash
• Battery: Non-removable Li-Ion 3000 mAh battery
• Operating System: Android 8.1 (Oreo), upgradable to Android 9.0 (Pie)

Instructions to Replace Parts for Blackberry KEY2 Lite

Replacing parts of Blackberry KEY2 Lite requires certain tools like plastic opening tools, small Phillips head screwdriver, spudger, and a pair of tweezers. Always remember to power off your device before starting the repair to avoid any damage.

Warning: It is highly advised to take plenty of time, and avoid using excessive force as it might cause more damage to the device.

Step-by-Step Instructions

• Remove the Back Cover

  Insert a plastic opening tool in a corner of the phone between the back cover and the frame. Gently slide the tool around the edges to separate the back cover. Lift the cover away and place it aside.

• Remove the Battery

  With a pair of tweezers, lift the battery connector straight up from the board to disconnect it. Insert a plastic opening tool under the battery and gently pry it free. Be careful not to puncture or bend the battery.

• Remove the Broken Part

  Identify the broken part that needs replacing. It might involve more screws and connectors. Make sure to keep track of all the screws and how they fit back together. Use the tweezers or the plastic tool, depending on the part, to carefully remove it.

• Install the New Part

  Take the new part and fit it where the old one was. Ensure that it is placed properly and any connectors are reattached. Place any screws back in the appropriate places.

• Re-install the Battery and Back Cover

  Place the battery back on the board. Be sure to reattach the battery connector. Align the back cover with the frame and press it into place. Make sure it is secure all the way around.

Power up your Blackberry KEY2 Lite and check to ensure everything is in working order. If any issues arise, retrace your steps to see if any part wasn’t installed correctly.