Blackview BV6000 spare parts

Technical Characteristics of Blackview BV6000 Repuestos

The Blackview BV6000 is a robust phone with unique components, commonly referred to as 'repuestos'. Here are their technical characteristics:

• Display: Its 4.7-inch IPS screen has 720 x 1280 pixel resolution.
• Battery: It features a non-removable Li-Po 4500mAh battery.
• Processor: Equipped with a MediaTek MT6755 Helio P10 Octa-core processor.
• Memory: This device comes with 3GB of RAM and 32GB of internal memory, expandable up to 32GB via microSD.
• Camera: The BV6000 features a 13MP rear camera and a 5MP front camera.
• Sensors: It includes sensors like proximity, light, accelerometer, and compass.

Instructions for Replacing Blackview BV6000 Repuestos

Tools Needed:

• Small Phillips Screwdriver
• Plastic Opening Tools
• Tweezers

Step 1: Removing the Back Cover

Turn off the phone. Unscrew the four corners of the back cover using the small Phillips screwdriver. Using the plastic opening tool, gently pry off the back cover from the phone body.

Step 2: Disconnecting the Battery

Locate the battery connector and carefully disconnect it.

Step 3: Removing the Battery

Use the plastic opening tool to lift the battery out of its compartment. Be gentle to avoid damaging the battery.

Step 4: Replacing the Repuestos

Depending on the repuesto you are replacing, the next steps can vary. Remove the screws holding the part in place, disconnect the connecting cables, and carefully remove the Repuesto.

Step 5: Installing the New Repuesto

Place the new part in the correct location. Connect any necessary cables and return any screws to their proper locations.

Step 6: Re-assembly

Replace the battery and reconnect the battery connector. Finally, reattach the back cover and screw it back in place.

Note: These are general steps and might vary slightly based on the specific repuesto being replaced. Always ensure the phone is powered off before beginning repairs, and proceed with caution.