Blackview BV8000 Pro spare parts

Technical Specifications of Blackview BV8000 Pro Repuestos

The Blackview BV8000 Pro Repuestos includes several key components that ensure the phone's optimal performance. Among these components are:

• Display: 5.0 inches IPS, HD, 1080 x 1920 pixels
• Battery: 4180 mAh, Non-Removable, Li-Po
• Memory: 64GB storage, microSD card slot
• System: Android 7.0 (Nougat), upgradable to Android 8.0 (Oreo)
• Camera: Rear camera 16MP, Front camera 8MP

Instructions for Replacing Blackview BV8000 Pro Repuestos

Replacing the components of Blackview BV8000 Pro requires the right tools, patience, and following the procedures carefully. Below are the detailed steps:

Preparation

Ensure you have the following tools: a SIM card removal tool, a plastic opening tool, and a screwdriver. Make sure that your workspace is clean and well-lit.

Step 1: Power off your phone

Before starting the replacement, switch off your phone to prevent any circuit damage.

Step 2: Remover SIM Card

Delete the SIM Card and the memory card from their respective slots.

Step 3: Unscrew and Open the Case

Use your screwdriver to remove the screws located at the back of the device. Lever it open with the plastic opening tool.

Step 4: Disconnect Battery

Use your plastic opening tool to carefully detach the battery connector from the motherboard.

Step 5: Replace the Desired Parts

Once your phone's interior is exposed, carefully locate and remove the part that you need to replace. Install the new part and make sure it's fixed correctly.

Step 6: Reassemble the Phone

After replacing the part, reconnect the battery and put the cover back on. Return the screws to their original places and tighten them.

Step 7: Power Up the Phone

Once everything is back in its place, turn on your phone. Check to see if the new replacement part is working correctly.

When dealing with small connectors, applying too much pressure can result in damage. Always handle with care.