Blackview BV9000 Pro spare parts

Technical Specifications of Blackview BV9000 Pro

The Blackview BV9000 Pro is a robust smartphone, ideal for challenging environments. Here, we provide an overview of its technical specifications:

• Display: 5.7 inch 1440 x 720 screen
• Processor: Helio P25 2.6GHz Octa Core
• System: Android 7.1
• Ram + Rom: 6GB + 128GB
• Camera: 13.0 MP + 5.0MP rear camera + 8.0MP front camera
• Battery Capacity (mAh): 4180mAh
• Additional Features: E-Compass, Gravity Sensor, Ambient Light Sensor, Gyroscope, Barometer, OTG

Instructions for Replacing Blackview BV9000 Pro Repuestos

Please follow these steps to replace the Blackview BV9000 Pro repuestos:

Tools Needed

• Small Phillips Screwdriver
• Plastic Opening Tools
• Heat Gun / Hair Dryer

Steps for Replacement

• Switch off the BV9000 Pro and unplug any connected cables.
• Use the Phillips Screwdriver to remove the screws on the compartment at the back of the phone.
• Carefully detach the back cover using Plastic Opening Tools. This should be done slowly to avoid damaging any parts.
• Locate the damaged repuesto and carefully disconnect it from its connector.
• If the repuesto is glued, use a Heat Gun or Hair Dryer to loosen the adhesive. Then, slowly lift the part away from the phone.
• Next, connect the new repuesto to the connector and properly position it in the phone. If required, adhere it with a suitable glue.
• Reattach the back cover and put back the screws.
• Turn on your BV9000 Pro to ensure the new repuesto is functioning correctly.

Remember to take necessary safety precautions while attempting repairs, including using tools correctly and keeping them out of reach of children.