Blackview BV9600 Pro spare parts

Technical Characteristics of Blackview BV9600 Pro Repuestos

Blackview BV9600 Pro screen repuestos offer a display form that is bright and clear. They have a compact size of 6.21 inches and a resolution of 1080 x 2248 pixels that ensures high-quality visual performance. The screens are Touchscreen and have a multitouch feature allowing optimal user interaction.

Instructions to Replace Blackview BV9600 Pro Repuestos

Tools Required

• Replacement Parts for Blackview BV9600 Pro
• Small Philips Screwdriver
• Thin Prying Tool
• Opening Picks
• Heat Gun

Blackview BV9600 Pro Disassembly

Before you start with the disassembly process, make sure you turn off your Blackview BV9600 Pro to avoid any electrical mishaps.

• Remove the screws at the bottom of the phone.
• Use an opening pick to pry up the phone's back cover.
• Disconnect the battery connector once the back cover is open.
• Remove the remaining screws that hold the motherboard in place.
• Disconnect the screen's connector from the motherboard.

Blackview BV9600 Pro Screen Replacement

To replace the screen on a Blackview BV9600 Pro, follow the steps below:

• After the motherboard is out, you can see the screen, which is held in place with adhesive.
Heat the front screen with a heat gun or blower to melt the adhesive. Be sure to apply heat evenly and avoid overheating the phone as it can damage the internal components.
• Use a prying tool to carefully lift the screen from the frame.
• Once the old screen is removed, clear any remaining adhesive from the phone frame and then apply new adhesive.
• Place your new Blackview BV9600 Pro repuestos screen onto the phone. Make sure it lines up correctly before firmly pressing it into place.

Reassembly of Blackview BV9600 Pro

To reassemble the phone, reverse the disassembly process:

• Reconnect the screen's connector to the motherboard.
• Replace the motherboard and screw it back into place.
• Reconnect the battery connector.
• Press the back cover back into place.
• Screw the bottom screws back in.

Once your phone is reassembled, you can turn it on and check if your new screen is working properly.