Blackview BV9700 Pro spare parts

Blackview BV9700 Pro Technical Specifications

The Blackview BV9700 Pro is a highly robust smartphone, designed for tough environments and conditions. Here we define some of its technical characteristics:

• Display: 5.84 inches, 1080 x 2280 pixels, IPS LCD
• Processor: Mediatek Helio P70
• RAM: 6GB
• Storage: 128GB, expandable via microSD card
• Battery: 4380mAh, fast charging
• Operating System: Android 9.0 (Pie)
• Camera: Dual-Ream 16MP + 8MP, Front 16MP
• Connectivity: Bluetooth 4.2, Wi-Fi 802.11 a/b/g/n, GPS

Instructions for Replacing Blackview BV9700 Pro Repuestos

Here are the detailed steps on how to replace the parts of the Blackview BV9700 Pro:

Tools Needed

• Screwdriver
• Plastic opening tools
• Spudger
• Tweezers

Step-by-Step Guide

Follow these steps for replacing the Blackview BV9700 Pro parts:

1. Before you start, ensure that your Blackview BV9700 Pro is completely switched off. Unplug the device if it’s charging.
2. Remove the back cover of the BV9700 Pro using the plastic opening tools in order to expose the internal components.
3. Detach the battery connector from the motherboard with the spudger tool. Once disconnected, lift out the battery.
4. Use the screwdriver to remove any screws securing the damaged part you wish to replace. Note that some parts may be connected by adhesive or small clips in addition to screws.
5. Carefully remove the damaged part.
6. Place the new part in the slot of the old part.
7. Replace and tighten the screws you removed earlier.
8. Reconnect the battery connector and replace the back cover of the phone.
9. Power on your device to ensure it is working properly.

Remember, working with small parts can be difficult. If you're having trouble or the replacement part isn't fitting correctly, don't force it. Instead, refer to the manufacturer's guide or contact a professional.