Blackview BV9800 repuestos

Blackview BV9800 Repuestos Technical Specifications

The Blackview BV9800 Repuestos is a rugged smartphone designed for extreme conditions. Here are its core specifications:

• Display: 6.3-inch HD+ IPS
• Resolution: 2340 x 1080 pixels
• Processor: Helio P70 Octa Core
• Battery: 6580mAh
• Ram: 6GB
• Storage: 128GB
• Camera: 16MP + 48MP Rear, 16MP Front
• Operating System: Android 9 Pie

Replacement Instructions for Blackview BV9800 Repuestos

Begin by ensuring you have all necessary tools and replacement parts. The replacement process will comprise of opening the device, removing the faulty part, and installing the new one.

Required Tools:

• Screwdriver
• Plastic prying tools
• Eject pin
• Replacement parts

Instructions

Step 1: Turn Off The Phone

Make sure to switch off your phone to avoid causing any short circuits during the replacement process.

Step 2: Remove The Back Cover

Use the eject pin to remove the sim card tray, then use a screwdriver to remove the screws at the bottom of the phone. Be cautious to avoid any scratches on the phone. Once the screws are removed, utilize the plastic prying tool to carefully find a gap and lift the rear cover off the phone.

Step 3: Disconnect The Battery

Once inside, you will need to disconnect the battery. Just look for a connector that links the battery to the motherboard and carefully unplug it using the plastic prying tool.

Step 4: Replace The Faulty Part

Depending on the faulty part, find it on the motherboard and unscrew or unplug it. Then, replace it with the new part, ensuring that the part is well connected in its designated location.

Step 5: Reassemble The Phone

Once the part is replaced, reconnect the battery and mount the back cover correctly. Replace the screws at the bottom of the phone and insert sim card tray. Restart your device and check if the new part is working correctly.

Disclaimer: Be aware that opening up your device may void certain warranties. Proceed with caution and refer to professionals if needed.