Blackview Max 1 spare parts

Technical Characteristics of Blackview Max 1 Repuestos

The Blackview Max 1 Repuestos are components that are designed to replace various elements of the Blackview Max 1 smartphone. The following are some of the technical characteristics:

• Screen: 6.01 inch AMOLED
• Resolution: 2160 x 1080 pixels
• Battery: 4680mAh non-removable battery
• Rear Camera: 16.0MP
• Front Camera: 16.0MP
• Processor: MT6763T (Helio P23) Octa Core
• Memory: 6GB RAM + 128GB ROM
• Network: Supports 2G, 3G and 4G

Instructions for Replacing Blackview Max 1 Repuestos

Tools Needed

• Small Phillips head screwdriver
• Plastic opening tool
• Tweezers
• Heat gun or hairdryer

Disassembly Process

Note: Make sure to power off your Blackview Max 1 and remove the SIM tray before disassembly.

1. Using your heat gun or hairdryer, apply heat around the edges of the phone's back cover to soften the adhesive. Then, use the plastic opening tool to gently pry and lift the back cover off.

2. Once the back cover is removed, use your screwdriver to remove all the visible screws attaching the metal shielding.

3. With the screws removed, use your plastic opening tool to gently lift the shielding to reveal the internal components of the Blackview Max 1.

4. Next, disconnect the battery connector from the motherboard using your plastic opening tool.

5. Now, locate the repuesto that needs replacing. It could be the camera, screen, or any other component. To replace any component, carefully disconnect its connector from the motherboard (if applicable), remove any screws holding it in place (if applicable), and gently lift it out of the phone.

6. Replace the part with your new Blackview Max 1 repuesto, following the removal methods in reverse. Make sure to properly reattach any connectors and screws.

Reassembly Process

1. Reconnect the battery connector to the motherboard and then reattach the metal shielding, securely fastening all screws.

2. Finally, align the back cover with the phone and press it into place until it clicks. Make sure to apply heat if needed to help the adhesive bond.

3. Power on your Blackview Max 1 to make sure everything is functioning properly after the repair.