Blackview S8 spare parts

    There are 15 products.

    Technical Characteristics of Blackview S8 Repuestos

    The Blackview S8 repuestos include several components crucial to the performance and functionality of the Blackview S8 smartphone. Here are their specific technical characteristics:

    • Screen: An HD IPS touchscreen with a 720 x 1440 pixel resolution. It measures 5.7 inches diagonally and offe...

    Technical Characteristics of Blackview S8 Repuestos

    The Blackview S8 repuestos include several components crucial to the performance and functionality of the Blackview S8 smartphone. Here are their specific technical characteristics:

    • Screen: An HD IPS touchscreen with a 720 x 1440 pixel resolution. It measures 5.7 inches diagonally and offer multi-touch functionality.
    • Battery: A 3180mAh non-removable lithium-polymer battery.
    • Camera: Dual rear camera (13.0MP + 0.3MP) with flash and autofocus, and dual front camera (13.0MP + 0.3MP).
    • Motherboard: A MediaTek MT6750T chipset runs on an Octa-Core 4x 1.5 GHz ARM Cortex-A53 processor.
    • Storage: An internal storage of 64GB with 4GB RAM, expandable up to 128GB via microSD card.

    Instructions for Replacing Blackview S8 Repuestos

    Before starting, ensure you have the necessary tools - a good set of smartphone repair tools including different screwdriver sizes, tweezers, pry tools, and a suction cup.

    Screen Replacement

    Step 1: Turn off the device and remove the SIM card tray.

    Step 2: Heat the edges of the screen gently with a heat gun to soften the adhesive holding it in place.

    Step 3: Use a suction cup and pry tool to lift the screen carefully. Avoid damaging the ribbon cables connected to it.

    Step 4: Disconnect the cables, remove the broken screen and attach the new screen by connecting the cables and firmly sticking it back in place.

    Battery Replacement

    Step 1: After removing the screen following the previously mentioned steps, locate the battery connection on the motherboard.

    Step 2: Detach the battery connector. Thereafter, pry the battery out carefully, not to damage the motherboard.

    Step 3: Place a new battery and attach the connector back.

    Camera Replacement

    Step 1: Locate the camera connector on the motherboard after removing the screen.

    Step 2: Disconnect the connector, remove the faulty camera and connect the new camera.

    Remember to always reassemble your device by reversing the order of the steps used to disassemble it.

    Less
    More
    Showing 1 - 15 of 15 items